Danfoss TripleLynx Installation Manual page 14

Illustration 3.8: Open the Inverter
Illustration 3.9: Close the Inverter
Push the front cover upwards. When a slight
resistance is felt, give the front cover a tap
on the bottom to snap it into holding posi-
tion. It is recommended to use the holding
position instead of dismounting the front
cover completely.
To close the inverter, hold on to the lower
end of the front cover with one hand and
give it a tap on the top until it falls into
place. Guide the front cover into place and
fasten the two front screws.
L00410309-07_02
3. Installation
3
13