Panasonic KX-TDA30 User Manual page 40

1.2 Making Calls
• The Message button light or Message/Ringer Lamp shows the current status as follows:
Off: No message
Red on: You have a message.
• The display shows the messages starting with the most recent call.
• At a called extension, the MESSAGE button allows you to clear message waiting indications
if you do not want to call the callers back. To clear, press the MESSAGE button and then press
the soft button.
• On your PT, you can establish one or more Message for Another Extension buttons. These
buttons can accept the message waiting notification of other extensions or various incoming
call distribution groups.
In other words, you can monitor the message waiting notifications of other telephones.
• A single line telephone extension user will receive a special dial tone as message waiting
notification when going off-hook.
• KX-TDA100/KX-TDA200/KX-TDA600 only
The message waiting lamp of a single line telephone can also let you know that you have a
message in the same way as the Message button.
Customising Your Phone
•
Joining an Existing Call (Executive Busy Override)
The preprogrammed extension can call someone who is busy on the telephone and establish a three-party
conversation.
To join an intercom call
PT/SLT/PS
Party joining the call
Off-hook.
Parties in the conversation
During a conversation
40 User Manual
3.1.3 Customising the Buttons
Create or edit a Message button or Message for Another Extension button.
extension no.
OR
(PDN)
OR
(SDN)
Dial extension number,
PDN, or SDN.
3
B. Tone
Enter 3.
C.Tone
Talk.
A three-party conversation
is now established.
C.Tone
Talk.