POSIFLEX KS - 6810 User Manual
POSIFLEX KS - 6810 User Manual

POSIFLEX KS - 6810 User Manual

Fan free touch terminal w/ mini slim base

Advertisement

Quick Links

KS - 6810
Fan Free Touch Terminal
w/ Mini Slim Base
User's Manual
Rev.: Original
FCC Notes:
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions manual, may cause interference to radio communications.
It has been tested and found to comply with limits for a Class A digital device pursuant to subpart
J of Part 15 of FCC Rules, which are designed to provide reasonable protection against
interference when operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his own expense will be
required to take whatever measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized technicians opens
the machine. The user should consult his/her dealer for the problem happened. Warranty voids if
the user does not follow the instructions in application of this merchandise. The manufacturer is by
no means responsible for any damage or hazard caused by improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the content in this manual. However, Posiflex
will assume no liability for any technical inaccuracies or editorial or other errors or omissions
contained herein, nor for direct, indirect, incidental, consequential or otherwise damages, including
without limitation loss of data or profits, resulting from the furnishing, performance, or use of this
material.
This information is provided "as is" and Posiflex Technology, Inc. expressly disclaims any
warranties, expressed, implied or statutory, including without limitation implied warranties of
merchantability or fitness for particular purpose, good title and against infringement.
The information in this manual contains only essential hardware concerns for general user and is
subject to change without notice. Posiflex reserves the right to alter product designs, layouts or
drivers without notification. The system integrator shall provide applicative notices and
arrangement for special options utilizing this product. The user may find the most up to date
information
of
the
hardware
from
web
sites:
http://www.posiflex.com
or
http://www.posiflex.com.tw or http://www.posiflexusa.com
All data should be backed-up prior to the installation of any drive unit or storage peripheral.
Posiflex will not be responsible for any loss of data resulting from the use, disuse or misuse of this
or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
or otherwise, without prior express written consent from Posiflex Technology, Inc. the publisher of
this documentation.
© Copyright Posiflex Technology, Inc. 2010
All brand and product names and trademarks are the property of their respective holders.
Part 1
P/N: 16590905010

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KS - 6810 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for POSIFLEX KS - 6810

  • Page 1 All data should be backed-up prior to the installation of any drive unit or storage peripheral. Posiflex will not be responsible for any loss of data resulting from the use, disuse or misuse of this or any other Posiflex product.
  • Page 2 ALERT TO OUR HONORABLE CUSTOMERS: Please always read thoroughly all the instructions and documents delivered with the product before you do anything about it. Don’t take any premature action before you have a full understanding of the consequences. This product contains inside a Lithium battery. Please always follow local environmental protection laws / regulations for disposal of used batteries and always replace only with battery of same type.
  • Page 3: Product Pictures

    INTRODUCTION PRODUCT PICTURES Front View Rear View Side Views Bottom View Inside Base PARTS IDENTIFICATION Optional MSR kit Main unit Touch panel / LCD panel Power indicator Undetachable mini Slim base stand Hinge Part 3...
  • Page 4: Product Features

    Base back cover Cable exit Power switch in recessed side 10. Base back cover hook 11. Sundries trough for pencils, paper clips etc. 12. CF memory card reader slot in recessed side 13. USB port in recessed side 14. Rubber feet with fixing screw 15.
  • Page 5 Shared video memory (max. 128 MB) k ) k ) k ) k ) Support high performance DDR2 DRAM with maximum memory size l ) l ) l ) l ) 2GB in one SODIMM Integrated structure for top mount upgrade kit with software m ) m ) m ) m ) programmable MSR parameters for WEPOS, POSReady or Windows XP Pro.
  • Page 6 INSTALLATION GUIDES CAUTION: Before any installation or cable connection to the set, please always make certain that the system is turned off and the external power source to the set is removed to prevent electric hazard! Never touch any metal pin in the connectors or circuits to avoid high voltage hazard or electrostatic discharge damage unless the operator is well grounded.
  • Page 7: Preparing The Main Unit

    Please note that only those qualified technicians may adjust in the service window with information from Posiflex and the contents in the service window may change without notice as time develops. The option LPT conversion cable...
  • Page 8: Connecting Cables

    The RJ11 connector in I/O area of a KS-6810 system can be used for controlling most of the common cash drawers available on the market. However, it is most recommended to use Posiflex CR-2200, CR-3100, CR- 4000, CR-4100 or CR-6300 for best compliance to operate the opening mechanism and to monitor the drawer open status.
  • Page 9: Operating System Recovery

    WEPOS/POSReady/Windows Embedded on HDD, Posiflex provides recovery DVD delivered with the touch terminal for the preloaded operating system. The System Integrator shall take care of software restoration after OS recovered. A Posiflex supplied USB interface COMBO drive will be required for such action. Other brand COMBO drive may require its specific driver different from what supported in the recovery DVD.
  • Page 10: Application Environment

    USING THE TOUCH TERMINAL APPLICATION ENVIRONMENT It is very important that you check the following operational guidelines: Ventilation This terminal must NOT be operated in an environment with restricted ventilation. There must be at least 25 mm air clearance around any top or side ventilation holes with a free flow of air around the unit at ALL times for the installation.
  • Page 11: Customer Display

    software resource conflict a simple push on the switch may fail to turn off the power. In this case, please utilize the forced power off feature by pressing the switch and holding for within 10 seconds. There must always be at least 10 seconds waiting before switching on again once the system is powered off successfully.
  • Page 12: Usb Ports

    DISPLAY ISSUES Main LCD Display For best viewing result please set your display resolution at 800 x 600 with high color. The system Video Memory is shared from system memory. The video memory size can be set to 128 MB max. SERIAL PORTS –...
  • Page 13: Posiflex Usb Touch Manager

    Posiflex USB Touch Manager A program named “Posiflex USB Touch Manager” and a right-click sticky button tool in the program group “Posiflex USB Touch Tools” is installed in the preloaded Windows system with a USB interface touch panel controller. This program can also be obtained by download from the POSIFLEX web site.

This manual is also suitable for:

Ks-6810

Table of Contents