POSIFLEX KS-7210 Series User Manual

POSIFLEX KS-7210 Series User Manual

Fan free touch terminal w/ mini slim base
Hide thumbs Also See for KS-7210 Series:

Advertisement

KS – 6910/7210 series
Fan Free Touch Terminal
w/ Mini Slim Base
User's Manual
Rev.: B0
FCC Notes:
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions manual, may
cause interference to radio communications. It has been tested and found to
comply with limits for a Class A digital device pursuant to subpart J of Part
15 of FCC Rules, which are designed to provide reasonable protection
against interference when operated in a commercial environment. Operation
of this equipment in a residential area is likely to cause interference in which case the user at his
own expense will be required to take whatever measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized technicians opens
the machine. The user should consult his/her dealer for the problem happened. Warranty voids if
the user does not follow the instructions in application of this merchandise. The manufacturer is by
no means responsible for any damage or hazard caused by improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the content in this manual. However, Posiflex
will assume no liability for any technical inaccuracies or editorial or other errors or omissions
contained herein, nor for direct, indirect, incidental, consequential or otherwise damages, including
without limitation loss of data or profits, resulting from the furnishing, performance, or use of this
material.
This information is provided "as is" and Posiflex Technology, Inc. expressly disclaims any
warranties, expressed, implied or statutory, including without limitation implied warranties of
merchantability or fitness for particular purpose, good title and against infringement.
The information in this manual contains only essential hardware concerns for general user and is
subject to change without notice. Posiflex reserves the right to alter product designs, layouts or
drivers without notification. The system integrator shall provide applicative notices and
arrangement for special options utilizing this product. The user may find the most up to date
information
of
the
hardware
from
web
sites:
http://www.posiflex.com
or
http://www.posiflex.com.tw or http://www.posiflexusa.com
All data should be backed-up prior to the installation of any drive unit or storage peripheral.
Posiflex will not be responsible for any loss of data resulting from the use, disuse or misuse of this
or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
or otherwise, without prior express written consent from Posiflex Technology, Inc. the publisher of
this documentation.
© Copyright Posiflex Technology, Inc. 2011
All brand and product names and trademarks are the property of their respective holders.
Part 1
P/N: 16440901030

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KS-7210 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for POSIFLEX KS-7210 Series

  • Page 1 All data should be backed-up prior to the installation of any drive unit or storage peripheral. Posiflex will not be responsible for any loss of data resulting from the use, disuse or misuse of this or any other Posiflex product.
  • Page 2 ALERT TO OUR HONORABLE CUSTOMERS: Please always read thoroughly all the instructions and documents delivered with the product before you do anything about it. Don’t take any premature action before you have a full understanding of the consequences. This product contains inside a Lithium battery. Please always follow local environmental protection laws / regulations for disposal of used batteries and always replace only with battery of same type.
  • Page 3 INTRODUCTION PRODUCT PICTURES – KS6910/7210TS Front View Rear View Side Views Bottom View Part 3...
  • Page 4 PRODUCT PICTURES – KS6910/7210HS Front View Rear View Side Views Bottom View Part 4...
  • Page 5 PRODUCT PICTURES – KS6910/7210 Front View Rear View Side Views Bottom View Part 5...
  • Page 6: Parts Identification

    KS-6910/7210HS for particular usage. e) e) e) e) CPU: Intel D425, 512K Cache, 1.80 GHz (KS-6910 series) Intel D525, 1M Cache, 1.80 GHz (KS-7210 series) f) f) f) f) Fan free structure for harsh environment g) g) g) g) Data storage device: SATA HDD, CF card or SSD HDD.
  • Page 7 l) l) l) l) Various I/O ports supported, including: 1. 3 serial ports with 2 in form of DB9 connectors and 1 of 10 pin RJ45 type modular connectors. COM1/2/3 are with capability for +5V DC support through software setting. 2.
  • Page 8: Using The Terminal

    INSTALLATION GUIDES CAUTION: Before any installation or cable connection to the set, please always make certain that the system is turned off and the external power source to the set is removed to prevent electric hazard! Never touch any metal pin in the connectors or circuits to avoid high voltage hazard or electrostatic discharge damage unless the operator is well grounded.
  • Page 9: Cable Routing

    CABLE ROUTING DISCONNECTING ALL CABLES With the LCD panel turned to most backward position, the main I/O connector area will be easily accessible at bottom side of the main unit. Please first note orientations of every existing cable connection and then disconnect every cable properly before any further reconfiguration of cable connections.
  • Page 10: Preparing The Main Unit

    Please consult your dealer for technical support on setup of these jumpers. Please note that only those qualified technicians may adjust in the service window with information from Posiflex and the contents in the service window may change without notice as time develops. The option LPT conversion cable should be applied to the connector as arrowed in left picture below.
  • Page 11: Connecting Cables

    The RJ11 connector in I/O area of the system can be used for controlling most of the common cash drawers available on the market. However, it is most recommended to use Posiflex CR-2200, CR-3100, CR-4000, CR-4100 or CR- 6300 for best compliance to operate the opening mechanism and to monitor the drawer open status.
  • Page 12: Application Environment

    USING THE TOUCH TERMINAL APPLICATION ENVIRONMENT It is very important that you check the following operational guidelines: Ventilation This terminal must NOT be operated in an environment with restricted ventilation. There must be at least 25 mm air clearance around any top or side ventilation holes with a free flow of air around the unit at ALL times for the installation.
  • Page 13 Hardware Power Switch The power switch located at side of the main unit is a tactile pushbutton switch. This switch controls the power on/off of the system. This switch turns the system on when pushed only and external power is present.
  • Page 14 DISPLAY ISSUES Main LCD Display For best viewing result please set your display resolution at 1024 x 768 with high color. The system Video Memory is shared from system memory and it support DVMT 4.0 technology. SERIAL PORTS – COM1/2/3 For this terminal, there are 3 serial ports available.
  • Page 15 Posiflex USB Touch Manager A program named “Posiflex USB Touch Manager” and a right-click sticky button tool in the program group “Posiflex USB Touch Tools” is installed in the preloaded Windows system with a USB interface touch panel controller. This program can also be obtained by download from the POSIFLEX web site.

This manual is also suitable for:

Ks-6910 seriesKs6910tsKs7210tsKs6910hsKs7210hsKs6910 ... Show all

Table of Contents