Return To Factory Setting - Rcom USB 20 User Manual

Incubation start with PC connecting mode
<Rcom USB 20 MODEL ONLY>
With this function, you can share incubation process,
optimum incubation setting by building a database.
Refer to the PC Software Manual for starting incubation
in PC connecting mode.
Incubation Termination
During incubation, press MENU button then you can
see a message as "System finish, Are you sure?"
Select YES with UP/DOWN button and press ENTER.
Change Cels. & Fahr.

Return to factory setting

When users have changed the incubator settings,
but want to return to factory setting.
Press SET UP button and select All Reset with
UP/DOWN button. Then, press ENTER.
If you press ENTER button once again, LCD display
goes off with message & alarm. Incubator returns to
factory setting after about 15 sec.
3. Function Settings
** WARNING **
(4) Incubation start with PC connection Mode
Return to Factory Setting
MENU
SET UP
BACK
LCD
Display
goes off
Initialization after about 15sec.