Rcom USB 20 User Manual page 14

3. Function Setting
Incubation start with Manual Mode
This mode helps users to set temp. humidity, and egg turning etc. according to their needs.
This mode is ideal for those persons who are experienced in incubation.
Press MENU button on basic screen.
Select the species of birds with UP/DOWN button
and press ENTER button then it goes to incubation
conditions setting mode.
Set required temp. humidity, and egg turning angle & interval
with UP/DOWN button, and press ENTER button to pass to
next step.
If there is no proper option, please select option other
bird, Refer to Page16.
Temperature setting
Setting of temperature of
early and middle stages of incubation.
Optimum incubation temperature of general birds at early and
middle stages is 37.5 , and the temperature of
final stage is better to set at 37
before the expected date of hatching (D-Day)
User can optionally change the temperature
of early, middle, and final stages of incubation.
(Default settings:
Setting of humidity of
early and middle stages of incubation.
The optimum humidity depends on type of birds.
However the humidity of final stage
(3 days before incubation)is generally higher than that of
early and middle stages
(Default settings:
It is recommended to raise the humidity setting to
over 60% from 1~3days before hatching.
(In areas of high ambient humidity, the humidity
may not need to be raised until the last half day -
after the chick is into the air space at the end of the egg.)
Temperature and humidity is optimized when Rcom products are released.
We do no recommend customers to recalibrate by their own. If you need to recalibrate, please visit our
website (www.rcom.co.kr Download Manual) or ask purchase place.
Because of low price thermometers and hygrometers are not accurate, e recommend you to use special
calibrated thermo-hydrometer. (Poultry only thermo-hydrometer: check Rcom website: Digilog )
Setting of temperature of
final stage of incubation.
three days
37.5 , 37.0 , 3days)
Setting of humidity of
final stage of incubation
of incubation.
45%, 60%, 3days)
(2) Incubation start
with Manual Mode
MENU
Setting of date of temperature change
in the final stage of incubation.
.
UP
DOWN
ENTER
[Temperature Setting]
Setting of date of humidity change
in the final stage of incubation.
[Humidity Setting]