Other Problems - JVC HR-S9600U Instructions Manual

OTHER PROBLEMS

SYMPTOM
1. When scanning channels, some of
them are skipped over.
2. The channel can't be changed.
3. The remote control won't operate
my TV or cable box or DBS receiver.
4. Even though Auto or Semi-Auto
clock setting has been selected, the
clock is incorrect.
ATTENTION
This VCR contains microcomputers. External electronic noise or interference can cause microcomputer to malfunction. If the VCR
does not operate correctly switch its power off and unplug the power cord from the AC supply. Wait for a while and then plug the
power back in. Eject and check the condition of the cassette. If everything appears normal resume operating the VCR as usual.
POSSIBLE CAUSE
Those channels have been preset to
be skipped.
Recording is in progress.
The remote control brand setting is
incorrect.
The clock setting data received from
the Host Channel is incorrect.
CORRECTIVE ACTION
If you need the skipped channels,
restore them ( pg. 14).
Press PAUSE to pause the recording,
change channels, then press PLAY to
resume recording.
Re-set the remote control to the
correct brand ( pg. 60 or 61 or 62).
Select a different Host Channel during
the Semi-Auto setting procedure
( pg. 11), or perform the Manual
setting procedure ( pg. 12).
67
EN