Timescan; Variable-Speed Search/Reverse Motion Playback - JVC HR-S9600U Instructions Manual

TimeScan

1
4
7
1
MENU
2 3
2
5 6
8 9
0
4
CH
PAUSE
TIME SCAN
OK
Your VCR is equipped with the TimeScan function. TimeScan
allows noise free pictures to be displayed on your TV screen in
the forward and reverse search modes. Audio will be played back
at normal speed during any of the TimeScan modes (
TimeScan allows you to view a program in search mode while
listening to the audio.
NOTES:
"TIMESCAN AUDIO" must be set to "ON", or the sound will
not be heard in TimeScan mode (
The audio will not synchronize with the video in TimeScan
modes.
During 1.5x speed TimeScan the audio playback speed will
also be 1.5 times normal, so dialog will sound fast-talking.
In Pause mode 3 seconds (approx.) of audio will be played
JOG
back repeatedly. (
SHATTLE
In TimeScan search modes some of the audio information will
not be played so that the audio can keep up with the video.
Audio signal during TimeScan
Playback tape
Sound of 1, 3 and 5 is heard.
Sound of 2 and 4 is not heard.
Output audio signal is normal (monaural) sound.
Variable-Speed Search/
Reverse Motion Playback
ACTIVATE VARIABLE-SPEED
SEARCH
1
During playback or still, turn the VCR's TIME SCAN
SHUTTLE ring. It remains at that position even after you
release it. Each time it passes a click position, the
playback speed changes.
OR
During playback or still, repeatedly press and release
TIME SCAN ™ or £ to select the search speed.
(Refer to the chart on page 38 for playback speeds).
To increase the speed in the forward direction, press
and release £ repeatedly to select the various
forward search modes.
To decrease the speed in the forward direction, press
and release ™.
To play in reverse slow motion, and in reverse play
mode, continue to press ™ repeatedly after
selecting all the forward slow motion modes.
(Refer to the chart on page 38 for playback speeds).
To resume normal playback, press PLAY.
If the superimposed indication jitters vertically during
TimeScan, adjust until the optimum condition is achieved
by using manual tracking (
pg. 38).
pg. 24)
1 2 3 4 5
pg. 26).
37
EN
pg. 38).