Imple Playback And Recording; Simple Playback - JVC HR-S9600U Instructions Manual

SIMPLE PLAYBACK AND RECORDING
Simple
Playback
Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
1
4
7
1
REW (Rewind)
STOP
2 3
2
5 6
8 9
0
4
FF (Fast-Forward)
LOAD A CASSETTE
1
Make sure the window side is up, the rear label side is
facing you and the arrow on the front of the cassette is
pointing towards the VCR. Don't apply too much
pressure when inserting.
The VCR's power comes on automatically.
The counter is automatically reset to "0:00:00".
If the cassette's record safety tab has been removed,
playback begins automatically.
FIND PROGRAM START
POINT
2
If the tape is advanced past the start point, press REW
or turn the TIME SCAN SHUTTLE ring to the left.
To go forward, press FF or turn the TIME SCAN
SHUTTLE ring to the right.
START PLAYBACK
JOG
SHATTLE
3
Press PLAY. "VIDEO CALIBRATION" appears on the
screen (when VIDEO CALIBRATION is set to "ON"
pg. 35).
STOP PLAYBACK
4
Press STOP or STOP/EJECT. Then press STOP/EJECT
to remove the cassette.
Usable cassettes
Full-Size VHS
T-30 (ST-30**)
T-60 (ST-60**)
T-90
T-120 (ST-120**)
T-160 (ST-160**)
ST-210**
Compact VHS*
TC-20 (ST-C20**)
TC-30 (ST-C30**)
TC-40 (ST-C40**)
* Compact VHS camcorder recordings can be played on
this video recorder. Simply place the recorded cassette
into a VHS Cassette Adapter and it can be used just like
any full-sized VHS cassette.
** This VCR can record on regular VHS and Super VHS
cassettes. While only VHS signals can be recorded on
regular VHS cassettes*, both VHS and Super VHS signals
can be recorded and played back using Super VHS
cassettes.
* By using S-VHS ET it is possible to record and play back with
S-VHS picture quality on VHS cassettes with this VCR.
21
EN