JVC HR-S9600U Instructions Manual page 47

1 2
4 5
NUMBER
8
7
0
1
MENU
JOG
SHATTLE
3
2
6
9
4
TIME SCAN
OK
ACCESS GUIDE CHANNEL
SET SCREEN
4
Press CH5∞ or TIME
SCAN %fi to move the
highlight bar (arrow) to
"GUIDE CHANNEL SET",
then press OK or TIME
SCAN #.
INPUT GUIDE CHANNEL
NUMBER
5
Press CH5∞, TIME SCAN
%fi or the appropriate
NUMBER keys to input the
VCR Plus+ Guide Channel
number as shown in the
TV listing. Then press OK
or TIME SCAN #.
If you receive your
channels with a cable
box and if you have
properly set your
Controller, "CABLE CH" appears in place of "VCR
CH". If not, refer to pages 15 – 17 and re-perform the
procedure.
INPUT RECEIVING CHANNEL
NUMBER
6
Press CH5∞, TIME SCAN
%fi or the appropriate
NUMBER keys to input the
number of the channel on
which the Guide Channel's
broadcasts are received.
Then press OK or TIME
SCAN #.
Repeat steps 5 and 6 for
each instance.
RETURN TO NORMAL
SCREEN
7
Press MENU.
47
EN
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
=GUIDE CHANNEL SET
CABLE BOX SET
DBS RECEIVER SET
JLIP ID NO. SET
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
(Ex.) When inputting the
Guide Channel number
6 for WNJU(Ind.)
GUIDE CHANNEL SET
GUIDE CH : 6
VCR CH : – – –
PRESS NUMBER KEY (0-9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END
(Ex.) If WNJU(Ind.) is
received on channel 47
GUIDE CHANNEL SET
=
GUIDE CH : 6
VCR CH : 47
PRESS NUMBER KEY (0-9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END