Features; Playback Features; Superimpose - JVC HR-S9600U Instructions Manual

PLAYBACK AND RECORDING FEATURES
Playback

Features

MENU
1
4
7
1
MENU
To recall an indication
1
Press OSD.
All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record Pause
mode, are left displayed on the screen.
2
Press OSD again to clear the display.
The RECORD/PAUSE indication is left displayed on the
screen.
The superimposed indication on the TV screen tells you what the VCR is doing.
Tuned-in channel or AUX(iliary) mode
When the channel is changed, the new
channel is displayed on the screen for
5 seconds.
Stereo program indication
Second Audio Program indication
Tape position indicator
Ghost reduction mode
OK
OSD
2 3
2
5 6
8 9
0
4
TIME SCAN
OK
CH 125
THU 12:00 AM
STEREO
Clock time
SAP
B
NORM
HI–FI
Audio mode
indications

Superimpose

This function, switchable between ON and OFF, determines
whether or not operational indicators will appear on screen.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
JOG
SHATTLE
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH5∞ or TIME SCAN %fi, then press OK or
TIME SCAN
SELECT SUPERIMPOSE SET
MODE
3
Move the highlight bar
(arrow) to "SUPERIMPOSE"
by pressing CH5∞ or
TIME SCAN %fi, then
press OK or TIME SCAN
to select the desired mode:
a– Select "ON" if you want
the superimposed
operational indications
on the TV screen.
b– Select "OFF" if you do not want the superimposed
operational indications on the screen.
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
If you engage the Record Pause mode, RECORD/PAUSE is
displayed regardless of the Superimpose mode setting.
If you select a channel on which no signal is received, the
channel number is displayed regardless of the Superimpose
mode setting.
RECORD
PAUSE
] SP
GR: STANDARD
+ + +
E
INDEX-1
COUNT –1:23:45
Counter reading
Switchable to the tape
remaining time display
.
FUNCTION
VIDEO CALIBRATION
PICTURE CONTROL
AUTO TIMER
=SUPERIMPOSE
AUTO SP = EP TIMER
DIGITAL R3
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
Operation mode
When the operation mode is changed,
the new mode is displayed — RECORD
(5 sec.), PLAY (5 sec.), FF/REW (5 sec.
when engaged from Stop mode),
RECORD PAUSE (for as long as Pause is
engaged), and ITR *:** (5 sec.).
Tape speed indication
"Cassette Loaded" mark
When a cassette is loaded, the mark is
displayed for 5 seconds. It blinks when the
VCR's EJECT button is pushed.
INDEX indication
"STILL" and "SLOW 1/6" are displayed dur-
ing still picture and slow motion respectively.
23
EN
ON
AUTO
OFF
ON
OFF
ON