Audio Dubbing - JVC HR-S9600U Instructions Manual

Jvc video cassette recorder instructions
Hide thumbs Also See for HR-S9600U:
Table of Contents

Advertisement

Audio Dubbing

Audio cable
Audio component
(CD player etc.)
NOTES:
When monitoring the sound during Audio Dubbing, the
normal soundtrack is automatically selected. If you wish to
hear the Hi-Fi or mixed sound (Hi-Fi + Normal soundtracks),
refer to the "Select The Soundtrack" section (
select the soundtrack you wish to hear.
Audio dubbing stops automatically when the counter reaches
"0:00:00", and the VCR enters the Play mode. Check the
counter reading before dubbing.
Audio dubbing is also possible using the rear AUDIO IN
connectors.
Audio dubbing cannot be performed on a cassette that has
had its record safety tab removed.
When playing back an audio-dubbed tape, refer to the "Select
The Soundtrack" section (
you wish to hear.
Picture may be distorted during Audio Dubbing Pause.
It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
PAUSE
pg. 29) and
pg. 29) to select the soundtrack
Audio dubbing replaces the normal audio sound of a previously
recorded tape with a new soundtrack. Use your VCR as the
recorder.
Normal audio track
Video/Hi-Fi audio
track
JOG
SHATTLE
MAKE CONNECTIONS
1
Connect an audio component to the AUDIO IN L + R
connectors on the VCR's front panel. *When connect-
ing monaural equipment, use only the VCR's AUDIO
IN L connector.
SET INPUT MODE
2
Press the remote control's NUMBER key "0" and CH so
that "F-1" appears in place of a channel number.
LOCATE START POINT
3
Press PLAY to start playback of the tape in your VCR,
and press PAUSE when you find the point where you
want to start dubbing.
ENGAGE AUDIO DUBBING
4
Press A. DUB.
Your VCR enters the Audio Dubbing Pause mode.
(
blinks,
panel.)
START DUBBING
5
Engage the audio component's Play mode, then press
PLAY to start the tape in your VCR. Audio dubbing
begins at this point.
blinks and
panel.
To stop dubbing temporarily, press PAUSE. Press
PLAY to resume dubbing.
END AUDIO DUBBING
6
Press STOP to stop the tape in your VCR, and engage
the audio component's Stop mode.
EN
Pre-recorded tape
Audio-dubbed tape
and
light up on the front display
is displayed on the front display
57

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hr-s9600ekHr-s9600euHr-s9600msHr-s9600u(c)

Table of Contents