Other Problems - JVC HR-S9911U Instructions Manual

Video Navigation
SYMPTOM
Title screen does not
appear for the currently
inserted tape.
The VCR cannot search for
the correct program.
"MEMORY FULL" appears
on the screen when you try
to start recording.

Other Problems

SYMPTOM
The channel cannot be
changed.
Even though Auto or
Semiauto Clock Set has
been performed, the clock
is incorrect.
POSSIBLE CAUSE
The current inserted tape has not been recorded
on this VCR.
Two (or more) tape numbers are recorded on one
tape.
The VCR's memory for Video Navigation is full.
POSSIBLE CAUSE
Recording is in progress.
The clock setting data received from the host
channel is incorrect.
Tape information cannot be shown if it has not
been recorded on this VCR.
Video Navigation cannot work correctly on a tape
if it has more than one tape number. If this
happens, fast-forward the tape up to its end, eject
it, and try it again.
Check the remaining memory (
full, delete unnecessary Video Navigation
information (
Press PAUSE (9) to pause the recording, change
channels, then press PLAY (4) to resume
recording.
Select a different host channel during Semiauto
Clock Set (
( pg. 7).
— 28 —
CORRECTIVE ACTION
pg. 18). If it is
pg. 17).
CORRECTIVE ACTION
pg. 7), or perform Manual Clock Set