Table of Contents
Advertisement
Playback Features
NOTE:
Refer to the
SHUTTLE ring
illustration on the
right as you read
the following
procedures.
ATTENTION
● Picture may not appear during high-speed search with an
LP-recorded tape.
● In the high-speed search, still, slow motion or frame-by-
frame playback mode, the picture will be distorted, and
there will be a loss of colour.
Still Picture/Frame-By-Frame
Playback
1
Pause during playback.
Press
9
.
● If there is vertical jitter, use the PR buttons to correct the
picture.
2
Activate Frame-by-frame playback.
Turn the JOG dial to the right for forward frame-by-frame
playback, or to the left for reverse frame-by-frame
playback.
OR
Press
9
.
OR
Press
or
.
w
e
Slow Motion
During playback or still, turn the SHUTTLE ring to the
right for forward slow motion, or to the left for reverse
slow motion (refer to the illustration on the left).
OR
During still picture, press and hold
release. Press and release again to return to still picture.
OR
During still picture, press and hold
return to still picture.
High-Speed Search
During playback or still, turn the SHUTTLE ring all the
way to the right for forward high-speed search, or to the
left for reverse high-speed search. Releasing SHUTTLE
ring resumes still picture playback.
● For forward high-speed search, turn the SHUTTLE ring all the
way to the right and release it within 1 second.
● For reverse high-speed search, turn the SHUTTLE ring all the
way to the left and release it within 1 second.
OR
During playback or still, press
speed search, or
3
for reverse high-speed search.
NOTE:
For short searches, press and hold
seconds during playback or still picture. When released, normal
playback resumes.
To resume normal playback, press
17
EN
9
for 2 seconds, then
or
. Release to
w
e
5
for forward high-
5
3
or
for over 2
4
.
Advertisement
Table of Contents
