N1 Rackmount Kit Installation; Identifying The Sections Of The Rack Rails; Installing The Inner Rails - OpenEye OE4-N1U32 Hardware Manual

N1 RACKMOUNT KIT INSTALLATION

This section provides information on installing the OpenEye 1U NVR into a rack unit with the rack rails provided. There are a variety of
rack units on the market which may mean the assembly procedure will differ slightly. You should refer to the installation instructions
that came with the rack unit you are using.

IDENTIFYING THE SECTIONS OF THE RACK RAILS

You should have received two rack rail assemblies in the rack mounting kit. Each assembly consists of two sections: an inner fixed
chassis rail that secures directly to the server chassis and an outer fixed rack rail that secures directly to the rack itself (see Figure 1-
1). Two pairs of short brackets to be used on the front side of the outer rails are also included.
Figure 1-1. Identifying the Sections of the Rack Rails (right side rail shown)

INSTALLING THE INNER RAILS

Both the left and right side inner rails come pre-attached to the chassis.
29205AC 21