Table of Contents
Advertisement
CAUTION
!
RISK OF EQUIPMENT DAMAGE AND PERSONNEL INJURY.
USE OF AUTO RESTART IS SITE SPECIFIC. DO NOT ENABLE
AUTO RESTART UNLESS THE INFRASTRUCTURE IS
DESIGNED FOR UNATTENDED OPERATION AND THERE IS NO
CHANCE OF EQUIPMENT OR PERSONNEL HARM BY
AUTOMATIC RE-ENERGIZING OF THE SYSTEM.
CONSULT WITH YOUR LIEBERT SITE ENGINEER AS TO
WHETHER AUTO RESTART SHOULD BE ENABLED.
System Settings
The System Settings choice under the Config menu displays another pop-up menu with three
choices:
• Comm Options
• System Options
• System ID
To access the System Settings menu:
1. Select CONFIG from the menu bar.
2. Select SYSTEM SETTINGS from the Config menu.
Comm Options
The Comm Options dialog box allows you to configure the communications settings for the STS2.
• Select COMM OPTIONS from the System Settings Menu.
The Comm Options dialog box is displayed. See Figure 43.
• An option can be enabled by selecting YES.
• An option can be disabled by selecting NO.
• An option can be configured by selecting the adjacent option button to display a separate
configuration dialog box.
The instructions for configuring the communications options are provided in this section.
STS2 Touch Screen Display
87
Advertisement
Table of Contents
