Battery - Replace - Perkins 854E-E34TA Operation And Maintenance Manual

Industrial engines
Hide thumbs Also See for 854E-E34TA:
Table of Contents

Advertisement

SEBU8726
Illustration 44
2. Loosen bolt (5) and loosen nut and bolt 6. Also,
loosen nut and bolt (1).
3. Loosen nut (3) and turn screw (2) counter
clockwise. Turn the screw (2) in order to give
clearance to remove the belt (4).
4. Remove belt (4) and visually check all pulleys that
the belt operates. Ensure that all pulleys are clean
and free from damage. Ensure that the pulleys
rotate freely. Replace any component that is
damaged.
Illustration 45
(A) Belt configuration
5. Install the new belt, use belt configuration (A).
Visually check that the belt is correctly aligned.
6. Turn the screw (2) clockwise in order to tension the
belt. Ensure that the link adjuster (7) is at the
maximum extension, refer to illustration 45 .
7. Tighten bolt (5), nut, and bolt (6) and tighten nut
and bolt (1). Tighten these nuts and bolts to
50 N·m (37 lb ft).
8. Rotate bolt (2) counter clockwise two complete
revolutions and tighten nut (3) to 30 N·m (22 lb ft).
9. Install the guard, refer to OEM for more
information.

Battery - Replace

g02729648
Batteries give off combustible gases which can
explode. A spark can cause the combustible
gases to ignite. This can result in severe personal
injury or death.
Ensure proper ventilation for batteries that are in
an enclosure. Follow the proper procedures in or-
der to help prevent electrical arcs and/or sparks
near batteries. Do not smoke when batteries are
serviced.
The battery cables or the batteries should not be
removed with the battery cover in place. The bat-
tery cover should be removed before any servic-
ing is attempted.
Removing the battery cables or the batteries with
the cover in place may cause a battery explosion
resulting in personal injury.
1. Switch the engine to the OFF position. Remove all
electrical loads.
2. Turn off any battery chargers. Disconnect any
battery chargers.
3. Ensure that the battery disconnect switch is in the
OFF position.
4. Disconnect the NEGATIVE "-" cable from the
NEGATIVE "-" battery terminal.
g02603591
Maintenance Recommendations
Battery - Replace
85
i03559623

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

854f-e34854f-e34t854fe34ta

Table of Contents