3.7 System Data Conversion
3.7.1 System Data Conversion
There are the following four types of KX-TD500 Maintenance Console software (ROM
version).
• P981X (X: suffix, 'A' —) =KX-TD500V1M
• Q171XX (XX: suffix, 'AA' —) =KX-TD500V2M
• Q931XX (XX: suffix, 'AA'—) =KX-TD500V3M
• Q951XX (XX: suffix, 'AA'—) =KX-TD500V4M
KX-TD500V4M is a functionally expanded version of KX-TD500V1M/V2M/V3M, and the
system data of these four software is not compatible to each other.
To solve this problem, KX-TD500V4M is equipped with System Data Conversion function.
This enables the system data downloaded from KX-TD500V1M/V2M/V3M to be uploaded to
KX-TD500V4M.
If you are using the KX-TD500V1M system, system data should be converted to KX-
TD500V2M system data beforehand. After that, KX-TD500V2M system data should be
converted to KX-TD500V4M system data.
Operation
1.
Download the system data of KX-TD500V3M and save it as a file.
(Please refer to Section "3.6.2 Download (from PBX to PC).")
2.
Start up the KX-TD500V4M.
3.
Point to "File" in the Main Menu and click.
• The "File" drop-down menu is displayed.
Installation Manual
Maintenance Console Guide
203