Maintenance Console Guide
3.6 Backup
3.6.1 Backup
Backup is a procedure where a copy of the system programming data is stored on an external
storage medium, such as a floppy disk.
If it becomes necessary to re-initialize the system programming data, it will be faster to reload
from disk than by manual re-input.
This subsection describes a backup procedure of the system programming data at on-site using
a PC (Windows machine) via an RS-232C cable.
Backup can be categorized as follows:
Download (from KX-TD500 to PC)
Downloading the system programming data from the KX-TD500 System to the PC at on-site
can be done during on-line mode as well as off-line mode.
In case of Remote Access, download can be done during on-line mode only.
Upload (from PC to KX-TD500)
Uploading the system programming data from the PC to the KX-TD500 System can be done
during off-line mode only.
200
Installation Manual