Panasonic KX-TD500 Installation Manual page 147

Notes
• Two extensions are available for the OHCA function with one OHCA card. Please see
Page 149.
• The OHCA function for APT is only provided with the following APT: KX-T7130.
Connection to the PLC card (KX-T96172)
1.
Make sure that the extensions which use OHCA function have OHCA cards.
2.
Insert the connector (plug) on the OHCA card into the connector (jack) on the PLC card.
3.
Install the PLC card to a free slot. Please refer to Section "2.4.2 PLC Card (KX-T96172)."
OHCA card
Notes
• Two extensions are available for the OHCA function with one OHCA card. Please see
Page 149.
• The OHCA function for APT is only provided with the following APT: KX-T7130.
Installation Manual
PLC card
Installation
5-pin connector
(plug)
9-pin connector
(plug)
4-pin connector
(plug)
5-pin connector
(jack)
9-pin connector
(jack)
4-pin connector
(jack)
147