Amphenol 57Je Type Connector - Panasonic KX-TD500 Installation Manual

Installation

2.1.4 Amphenol 57JE type Connector

To connect Amphenol 57JE type (screw-attach-type 50-pin connector) to the Option Card,
follow the procedure below.
1.
The 50-pin connector (jack) on the Option Card has two hook-pins.
Remove the upper hook-pin, taking out the screw.
2.
To attach the Amphenol 57JE type (plug) to the connector, drive the Accessory Screw at the
upper part, and fasten the Accessory Wire Tie around the lower hook-pin and the Amphenol
57JE type, as shown below.
Option Card
Screw
Hook-pins
60
Accessory
Screw
Amphenol 57JE type
Accessory
Wire Tie
50-pin connector
When connecting a connector of the type shown
below, unscrew the lower hook-pin, too. Then drive
both Accessory Screws.
Accessory
Screw
Amphenol
57JE type
Accessory
Screw
50-pin
connector
Hook-pin
57JE type
Hook-pin
Accessory
Wire Tie
Option Card
50-pin connector
Installation Manual