Table of Contents
Advertisement
PSU15 Fuse type & size: SLOW 5X20 4A 250V~
Power and control data outputs from the power supply to the fixture are through an XLR 4-pin cable. The drain wire should be
connected to the chassis of the XLR.
XLR 4-pin Cable:
Pin #
Function
1
Ground (-ve)
2
Control data minus (-)
3
Control data plus (+)
4
48V DC (+ve)
Chassis
Cable shield/drain wire
Data signal from the external lighting control console to the power supply is through an XLR 5-pin cable.
XLR 5-pin Cable:
Pin#
Function
1
Ground (Screen)
2
Data Minus
3
Data Plus
4
Spare Data Minus
5
Spare Data Plus
Power Cable:
International Colour Code
Green and Yellow
Blue
Brown
Important Notice:
The use of an opto-splitter for DMX signal distribution is highly recommended when several fixture units are not plugged into the
same power source.
2.3
Mounting
The Studio Force Compact fixture is built with a mounting yoke for floor, wall and truss mounting applications.
The yoke features an added pair of holes for height adjustment. The fixture enclosure mounted on the top holes of the yoke
allows the fixture to face upwards and perpendicular. The fixture mounted on the bottom holes of the yoke allows the fixture to
face upwards only.
Studio Force D/V Compact User Manual
Minimum Cable size
2.50mm² (14 AWG)
0.35mm² (22 AWG)
0.35mm² (22AWG)
2.50mm² (14 AWG)
0.25mm² (24 AWG)
North American Colour Code
Green
White
Black
www.chroma-q.com
Connections
Earth (E)
Ground (Green)
Neutral (N)
Neutral (Silver)
Live (L)
Hot (Gold)
8
V1.7 June 2014
Advertisement
Table of Contents
