Chroma Studio Force D Compact User Manual page 20

2. Scroll and select a Look Store number
3. Press Enter to access the memory data
4. Press the Up/Down buttons up to the far end until the Control Mode number is shown then press Enter.
5. Press the Up/Down buttons to adjust the Mode number
6. Press Enter to toggle back to the channel numbers
To edit the channel numbers and levels of a selected Look:
1. From the Main Menu, scroll and select Look Store
2. Scroll and select a Look Store number
3. Press Enter to access the memory data
4. Press the Up/Down buttons and select the channel number
5. To edit the channel level, press Enter and use the Up/Down buttons to adjust the level (shown as 0-255)
6. Press Enter to toggle back to the channel number. When the desired effect is created press Enter for 2
seconds to save the edited Look.
System System System System
In this menu, the control system can be switched to control Color Force Compact, Studio Force D, V and Phosphor V
Compact fixtures.
1. From the main menu, scroll and select System
2. In System, select between Color, Daylight, Varywhite or Phosphor V
3. Press Enter for 2 seconds to save
Wireless Wireless
Wireless Wireless
In this menu, wireless DMX connection can be activated with the power supply unit assigned as a transmitter or
receiver.
To create a new wireless network:
- set all Receivers and unlink from previous connections - Unlink frm Trnsm
- set the Transmitter and Add Receivers
1. From the main menu, scroll and select Wireless
2. In Wireless Wireless, select from either Off
Wireless Wireless
The display shows W reset
To activate the wireless DMX connection between generic transceiver unit as the Transmitter and the Compact PSU
unit as the Receiver:
A. Setup the Compact PSU as the Receiver unit:
1. From the main menu, scroll and select Wireless
2. In Wireless Wireless, select Receiver Wireless Wireless
3. Press Enter for 2 seconds to save and display shows Wireless
4. Press Enter, display shows Receiver
5. Press Enter, display shows Unlink
6. Press Enter, Unlink frm Trnsm Unlink frm Trnsm blinks for a few seconds until the display goes back to the previous menu and Unlink frm Trnsm Unlink frm Trnsm
then the main menu. This will unlink previous signal connections.
Proceed to setup transmitter unit.
Upon completion of a successful link with the transmitter unit, the main menu displays "w w w w _" and the DMX signal
level is indicated by the horizontal bars beside it. (5 bars maximum) The menu display will indicate "wx wx wx wx" if there is
no signal connection.
B. Setup external Wireless DMX Transmitter/Transceiver:
Please refer to the User Manual of the external Transmitter/Transceiver unit for the steps to initiate signal/link with
the Compact PSU receiver unit.
Studio Force D/V Compact User Manual
Wireless
Wireless Wireless
Off, Receiver Receiver or Transmitter
Off Off Receiver Receiver
W reset when selecting between the options. W reset W reset
Wireless
Wireless Wireless
Receiver Receiver Receiver
Receiver Receiver Receiver
Unlink frm Trnsm frm Trnsm
Unlink Unlink frm Trnsm frm Trnsm
www.chroma-q.com
Look Store Look Store Look Store
Unlink frm Trnsm Unlink frm Trnsm Unlink frm Trnsm
Transmitter
Transmitter Transmitter
Wireless
Wireless Wireless
20 V1.7 June 2014