Related Manuals for Chroma Studio Force D Phosphor
Summary of Contents for Chroma Studio Force D Phosphor
- Page 1 ® Chroma-Q Studio Force™ D Phosphor User Manual Version 1.4 December 2014, Software Version 1.07 PN: 634-0502...
- Page 2 (c) by operation outside the specifications contained in the user documentation; (d) by the use of spare parts not manufactured or sold by Chroma-Q or by the connection or integration of other equipment or software not approved by Chroma-Q unless the Customer provides acceptable proof to Chroma-Q that the defect or damage was not caused by the above;...
- Page 3 Chroma-Q products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Chroma-Q sole warranty is that the product will meet the sales specifications in effect at the time of shipment.
-
Page 4: Table Of Contents
... 5 5 5 5 Unpacking the Units ............................. 5 Cabling ................................ 5 Mounting..............................5 Optical Accessories ............................5 Control ................................. 6 DMX Protocol – Studio Force D Phosphor ....................15 Thermal Performance ..........................15 Troubleshooting ............................................... -
Page 5: Product Overview
The Studio Force D Phosphor Studio Force D Phosphor Studio Force D Phosphor features two light engines with 24 Blue LEDs each for a total of 48 high powered Blue LEDs. Studio Force D Phosphor The fixture is equipped with a built-in power supply unit. The fixture can operate as a standalone unit or controlled remotely through the ANSI E1.11 USITT DMX 512-A protocol. -
Page 6: Operation
Note: The maximum number of Studio Force D Phosphor fixtures running off a single power input cable is 10 at 120V AC or 20 at 240V AC. Please refer to ANSI and AWG standards for the maximum data and power cable lengths. -
Page 7: Control
2.5 Control The Studio Force D Phosphor fixture can operate as a standalone unit or remotely controlled via ANSI E1.11 USITT DMX512- A protocol. The control functions can be accessed through the Touch Screen LCD display at the rear of the fixture. - Page 8 Command Description Button 0 – 9 Button numbers 0 to 9 for typing the new DMX start address. Apply Save the new DMX address. Escape Exit the screen without saving. www.chroma-q.com Studio Force D Phosphor User Manual V1.4 December 2014...
- Page 9 The fixture is set as the Slave unit in stand-alone operation. The fixture set as slave unit follows the control mode set with the Master unit. Apply Apply Apply Apply Save the settings. Escape Escape Escape Escape Exit the screen without saving. www.chroma-q.com Studio Force D Phosphor User Manual V1.4 December 2014...
- Page 10 Default – Factory default settings • User – User defined settings • Upload ENG The fixture can be set for software uploads through the Engine Upload screen. Escape Exit the screen without saving. www.chroma-q.com Studio Force D Phosphor User Manual V1.4 December 2014...
- Page 11 Playback the look recorded on Rec2 Rec2. Rec2 Rec2 Rec1 Rec1 Save a look for M1 Rec1 Rec1 Rec2 Rec2 Save a look for M2 Rec2 Rec2 Escape Escape Escape Escape Exit the screen. www.chroma-q.com Studio Force D Phosphor User Manual V1.4 December 2014...
- Page 12 Control Menu The control menu options are accessed through the touch-screen display at the rear of the Studio Force D Phosphor fixture. Main Menu Main Menu Main Menu Main Menu The Main Menu displays the fixture name, control information (current assigned DMX address, Footprint, Mode), and the 4...
- Page 13 The fixture output goes to the previously set manual settings. Setup Menu Setup Menu Setup Menu Setup Menu In this menu, internal settings of the Studio Force D Phosphor can be re-configured. DMX Data DMX Data DMX Data DMX Data...
- Page 14 Factory default sets the display screen to turn off and lock when untouched for 30 seconds. A lock symbol appears on the screen when touched. To disable or enable the lock, 1. On the Main Menu, tap Setup Menu Setup Menu Setup Menu Setup Menu. www.chroma-q.com Studio Force D Phosphor User Manual V1.4 December 2014...
- Page 15 3. Connect the fixture to an external uploader. Initiate the uploading process from the external uploader. • Follow the display prompts on the external uploader and the fixture. • 4. Tap the screen to exit. www.chroma-q.com Studio Force D Phosphor User Manual V1.4 December 2014...
-
Page 16: Dmx Protocol - Studio Force D Phosphor
Look 1 – 32 (Playback) 2.7 Thermal Performance The Studio Force D Phosphor is built with an internal fan for internal cooling. The fixture output is automatically reduced when internal temperature exceeds 75ºC for automatic protection. This happens on rare and extreme conditions when ambient temperature is over 35ºC or the internal fans are blocked or damaged. -
Page 17: Troubleshooting
Low LED output. Internal temperature is over the limit. Check “Fan Control” mode. Fan is not working. Check fan. Check for airflow - to and from the internal fan. Check area ventilation. www.chroma-q.com Studio Force D Phosphor User Manual V1.4 December 2014... -
Page 18: Specification
Beam Distribution Symmetrical direct illumination 5600K (+/- 200K) Color Gamut Performance enhanced Up to 71 Lamp Life L70 at 50,000 hours For exact measurements please refer to the line drawings below www.chroma-q.com Studio Force D Phosphor User Manual V1.4 December 2014... -
Page 19: Drawings - Dimensions
Maintenance With care, the Studio Force D Phosphor fixtures require little maintenance. However, as the unit is likely to be used in a stage environment we recommend periodical internal inspection and cleaning of any resulting dust and cracked oil residue.