Dmx Protocol - Chroma Studio Force D Compact User Manual

Uploader display shows DONE
8. Power-cycle the unit
(See Quick Start Guide of the Chroma-Q Uploader)
Fan Speed Fan Speed (PSU15 only) (PSU15 only)
Fan Speed Fan Speed (PSU15 only) (PSU15 only)
The Compact power supply units are built with internal fans with the following speed settings:
Live
Live when Light
Studio
Quiet
1. From the main menu, scroll and select Fan Speed
2. In Fan Speed Fan Speed select a speed setting
Fan Speed Fan Speed
3. Press Enter for 2 seconds to save.
Reset to Default Reset to Default Reset to Default Reset to Default
The fixture can be reset to factory default settings:
1. From the main menu, scroll and select Reset to Default
2. Press Enter, display shows reset?
3. 3. 3. 3. Press and hold Enter until the display shows resetting
All menu items are reset to factory defaults:
DMX address
Control Mode
When DMX is Lost
Looks
System
Frequency
Fan Speed
Software Uploads: Software Uploads:
Software Uploads: Software Uploads:
Control Software Upload: Control Software Upload: Control Software Upload: Control Software Upload:
The control software for the operation of the Compact fixtures can be uploaded directly from the Chroma-Q Uploader to the
Compact power supply unit via the XLR 5-pin connection with both units powered and no need to access the control menu.
1. Power-up the Compact PSU.
2. Connect an XLR 5-pin cable (single pair is fine) from the Uploader to the Compact PSU.
3. Connect Uploader to an AC power supply. The Uploader display shows the software name and version, and 'Ready'.
4. Press the GO button once to execute the uploading. The Red indicator light on the GO button blinks.
5. The Uploader display shows a simulated arrow moving from left to right indicating the uploading process.
6. The external device resets automatically upon completion of a successful upload.
7. The Uploader display shows 'DONE' upon completion of the upload.
8. Power-cycle the Compact PSU to verify the new software version. The device display shows the new software version.
9. Repeat step 1 to step 9 if the uploading process is interrupted (power and/or data).
2.7

DMX Protocol

PSU15 DMX Personality Modes 1-4: Daylight
V1.7 Control Mode 1
Studio Force D/V Compact User Manual
DONE
DONE DONE
fan speed is at high velocity
fan speed goes to high velocity when LEDs are turned on and remain at very low velocity
when LEDs are off
fan speed is at low velocity
fan is off
Fan Speed Fan Speed Fan Speed
Reset to Default Reset to Default Reset to Default
reset? reset? reset?
resetting and done resetting resetting
PSU15 PSU-300
001 001
14 9
Hold Hold
01 01
Color Color
1200 1200
Live
Control Mode 2
www.chroma-q.com
done when complete done done
Control Mode 3
22
Control Mode 4
V1.7 June 2014