Chroma Studio Force D Compact User Manual page 19

17 Mastr StandAlon
18 Slave StandAlon
P P P P SU SU SU SU- - - - 300 System: Phosphor V
Mode Mode Name Name
Mode Mode Name Name
1 KHL
2 KHL
16 Look sel
17 Mastr StandAlon
18 Slave StandAlon
When DMX is Lost When DMX is Lost When DMX is Lost When DMX is Lost
If DMX is not detected various output options can be selected:
Off Fixture snaps to off.
Hold Fixture holds the last valid DMX state.
Look 1-31 Fixture snaps to the selected Look
Look Store Look Store Look Store Look Store
In this menu, 31 internal preset FX Looks are available for stand-alone operation, 1-23 are pre-programmed.
To replay a Look in stand-alone operation,
1. From the Main Menu, scroll and select Look Store
2. In Look Store Look Store, scroll and select the Look number
Look Store Look Store
3. Press Enter for 2 seconds to save.
To replay a Look with a DMX console,
1. From the Main Menu, scroll and select Control Mode
2. In Control Mode Control Mode Control Mode, select Look Sel (Control Mode 16) Control Mode
3. Press Enter for 2 seconds to save.
Use the DMX console with the assigned channel to playback the various looks stored. (1-31 looks in 1 single
channel)
Note: Note: DMX has priority over internal Looks.
Note: Note:
Looks can be recorded to the internal flash memory by users and will be preserved on power down. However, looks
will be returned to default setting if Reset is performed. There are two ways to record a look:
Simple, create and save a look with a DMX console:
1. Set the fixture to the desired Control Mode.
2. Use a DMX console to adjust channel levels and create the desired look or effect.
3. From the Main Menu, scroll and select Look Store
4. Scroll and select the Look Store number.
5. Press Enter for 2 seconds to save the Look.
Advanced, create and save a look in standalone (DMX is unplugged):
1. From the Main Menu, scroll and select Look Store
2. Scroll and select a Look Store number
3. Press Enter to access the memory data. The data is presented as two numbers separated by a letter "c".
The number to the left of the "c" is the channel number and to the right is the channel level. Pressing
Up/Down up to the far end will show the Mode at which the selected Look was programmed.
To edit the Mode of a selected Look:
1. From the Main Menu, scroll and select Look Store
Studio Force D/V Compact User Manual
Master Standalone
Slave Standalone
300 System: Phosphor V 300 System: Phosphor V 300 System: Phosphor V
Group Group Ch Ch Ch Ch Description Description
Group Group Description Description
Single 15 5 x KHL
All 3 KHL
All 1 Look Select
Master Standalone
Slave Standalone
Look Look Look
Look Store
Look Store Look Store
Control Mode
Control Mode Control Mode
Look Store. Look Store Look Store
Look Store
Look Store Look Store
Look Store
Look Store Look Store
www.chroma-q.com
19 V1.7 June 2014