4.3
Wireless Card Installation
Instructions for installing W- - - - DMX option on PSU15
Instructions for installing W
Instructions for installing W
Instructions for installing W
When upgrading PSU15 with the W-DMX option please follow the steps below:
1.
Open the unit by removing the M3x6 screws that hold the cover. Save the screws. Put the cover aside and make sure
the ground harness is not damaged
2.
Check if the addressing card has a standoff attached, if not use the standoff and lock washer provided to create the
mounting point for the W-DMX card as shown in Figure 1
Studio Force D/V Compact User Manual
DMX option on PSU15
DMX option on PSU15
DMX option on PSU15
www.chroma-q.com
32
V1.7 June 2014