Maxtor OneTouch User Manual page 48

English
1. Open the Maxtor OneTouch utility.
The Drive Information section will appear. If you have
multiple Maxtor OneTouch drives, make sure you select the
drive you wish to reset.
2. Click the OneTouch Button tab.
3. Click the Default button.
3
This sets the button back to it's original settings
4. Click the Apply button.
This saves the settings.
5. Click the OK button to close the utility.
Macintosh
Drive Information:
1. Open the Applications folder on your Macintosh hard
drive and double-click the Maxtor OneTouch Settings
icon to open it.
The Maxtor OneTouch Settings window should appear.
2. In the lower part of the window, you should see your
OneTouch Drive listed and any other compatible Maxtor
Drives currently connected and turned on.
Here you can find out useful information, including:
• Model
44
• Serial Number
• Application to be opened by the OneTouch button
Customizing your OneTouch button:
Launching a different application or file
You can launch most any application or file on your computer with the
OneTouch button. For example, you could use it to launch a program
like QuickTime or even a specific QuickTime file.
1. Go to your Applications folder on your Macintosh Hard
Drive.
2. Double-click the Maxtor OneTouch Settings icon to
open it.
The Maxtor OneTouch Settings window should appear.
3. In the lower part of the screen you should see 'Volumes,'
'Maxtor OneTouch Drives' and 'Open. . .'
Your Maxtor OneTouch drive should appear in this area.
If you have multiple OneTouch drives you will be able to
select each one separately.
In the 'Open...' section of the screen, you should see the
Retrospect icon and the words: Maxtor OneTouch. This is
what is currently set to open when you press the button on
your OneTouch drive.
It's very simple to select a different program or file.
4. Make sure your drive is selected in this window and click
Select Action.