Maxtor OneTouch User Manual page 19

7. After reading the License Agreement, click Yes.
The Customer Information screen will appear.
8. Enter your User Name and Company Name.
Click Next.
The Choose Destination Location screen will appear.
9. In the Destination Folder section of the screen, you can
see where the Maxtor software will be installed. If you wish
to change this, click Browse and choose a new location.
When your are ready, click Next.
The Select Program Folder screen will appear.
10. You can see the name of the Maxtor program folder and
where it will appear in the Windows Start Menu. You can
make changes to these settings, if you need to.
When your are ready, click Next.
11. The Driver Information Database window will appear.
After short time, it will close and the installation will begin.
When the installation completes, the InstallShield Wizard
Complete window should appear.
12. Click Finish.
The Please Reboot screen should appear.
13. Select 'Yes, I want to restart my computer now' and
click OK
Your computer will now restart.
Please do not eject the Install CD unless you have chosen
not to install the Retrospect Express software.
14. When your computer restarts, an operating system window
will appear while the installation of your drive is completed.
After a short time, this window will close.
If you chose Custom Install earlier to not install Retrospect,
you can move to "Connecting with the FireWire Cable:" on
page 17.
Otherwise, the Retrospect Welcome screen will appear.
15. Click Next. The License Agreement screen should now appear.
16. After reading the agreement, select "I accept. ." and
click Next.
The Customer Information screen will appear.
17. Fill in your information and click Next.
The Setup Type screen will appear.
18. You can choose the Complete Installation (recommended) to
install all of the Retrospect Software or Custom Installation to
choose individual components and specify an install location.
Make your choice and click Next.
English
Installing Your Drive 15
2