Rear Wheel Geometry - Fiat Bravo Service Manual

Suspension and wheels
Wheel geometry
Bravo-Brava
44.
REAR WHEEL GEOMETRY
The wheel geometry must be checked after the following checks have been carried out:
- tyre pressures;
- the eccentricity and out-of-true of the wheel rims must not exceed 3 mm;
- wheel bearing endfloat.
r^
S\
V J
a
TOE-IN (non adjustable)
See data in Sec. 00
CAMBER (non adjustable)
If the rear wheel angles are not as specified, they cannot be adjusted as the rear suspension comprises a
rigid torsion beam.
30
Publication no. 506.670