Fiat Bravo Service Manual page 209

Engine
Fuel system
Bravo-Brava @i
16v
10.
DISPLAYED PARAMETERS
Engine rpm
Injection time
Absolute pressure to inlet manifold
Air temperature
Coolant temperature
Throttle opening angle
Battery voltage
Voltage LAMBDA probe status
Engine idle speed actuator
Self-adaptability
Vehicle speed
Mixture level
Petrol vapour solenoid
Fiat CODE
List of errors
RPM sensor
Throttle potentiometer
Absolute pressure sensor
Air temperature sensor
Coolant temperature sensor
Battery
Lambda probe
Injector
Ignition coils
Idle speed actuator
Fuel vapour solenoid
Actuator relays
Control unit
A.C-D.C.
A.C-D.C.
A.C-D.C.
A.C-D.C.
A.C-D.C.
Power supply > 15.5V
Power supply < 5V
Status not plausible
(probe disconnected or faulty)
D.C
A:C-D.C.
A.C-D.C.
No. of subsequent steps
A.C-D.C.
A.C-D.C.
Microprocessor or ECU memory faults are indi
cated.
Self-adaptive parameters
Timing sensor
Speed sensor
Signal framework
Mixture level
Fiat CODE
Indication displayed when ECU self-adaptive
limits reached,
This indication means that engine conditions
are much too far from specified levels and me­
chanical causes should also be investigated.
A.C-D.C.
Signal absent
Tooth count incorrect - Space between two
missing teeth not recognised
Greater than maximum threshold
Lower than minimum threshold
Code not recognised or not received
62
Publication no. 506.670