Bravo-Brava !g|
12v
Steering
Steering gear
41.
VARIABLE
RATIO
STEERING GEAR
RACK-AND-PINION
Removi ng - refitting
To remove the steering gear, proceed as fol
lows:
1. remove the bolt securing the lower col
umn to the steering gear pinion;
2. disconnect the transfer linkage from the
gearchange control linkage.
Raise the vehicle, remove the front wheels,
then working from both sides:
3. undo the nuts securing the right and left
tie-rods from the front vertical links;
4. use tool 1847035000 to prise off the
tie-rod heads from the two vertical links;
Copyright Fiat Auto
5