Fiat Bravo Service Manual page 480

Braking system
Anti-lock braking system
Bravo-Brava
33.
Front wheel speed sensor
To remove the front wheel speed sensor, pro­
ceed as follows:
- disconnect the electrical connector;
P4A24AD02
undo the bolt and remove the sensor.
0.645 - 1.305 mm
Checking gap between wheel speed sensor
and phonic wheel on front wheel constant
velocity joint
The gap is not adjustable since no
shims are supplied for the purpose. If
the value measured is outside the
specified tolerance limits, check the
condition of the sensor and the teeth
on the phonic wheel.
24
Publication no. 506.670