Fiat Bravo Service Manual page 274

Bravo-Brava
Clutch
Clutch operation
18.
THRUST BEARING
1 The thrust bearing should not show signs
of sticking or noise during rotation or else
it must be replaced.
FORK CONTROL SHAFT
Removing - refitting
2. Remove the circlip for the release lever
and remove the actual lever.
3. Remove the upper bush.
NOTE The bush in question is replaced
eachtime the clearance for the fork
control shaft is too great.
4. Remove the fork control shaft, releasing it
from the lower housing.
5. View of components removed
Copyright by Fiat Auto IX-95 - Cancels and replaces 5