Bravo-Brava l&t 16v
P4A021B01
Copyright Fiat Auto
Gearbox and differential
Removing - refitting
21-27.
1. Remove the nuts securing the fuse and re
lay box to the battery cage, then move the
box over to one side.
2. Disconnect the i.e. control unit supply
connector.
3. Remove the nuts securing the i.e. control unit
mounting bracket, then remove the control
unit from the engine compartment. The nuts
indicated also secure the starter motor supply
wiring and connection between the front ca
ble and fuel injection cable.
4. Remove the bolts (1) and slacken the bolt
(2) securing the battery cage to the body
work. Before removing the cage, discon
nect the cable clip underneath.
5. Disconnect the clutch cable by undoing
the nut (1) and lock nut (2) shown in the
figure. Also disconnect the earth cable (3)
from the gearbox.
21