Fiat Bravo Service Manual page 385

Engine
Fuel system
10.
Bravo &
20v
An additional duct ensures the lubrication of the bearing on the camshaft even when the device is not
activated.
The oil which reaches the chamber (H) for the electro-magnet is discharged through the drainage duct
(E).
Recovery
If the solenoid valve fails, the final stage (driver) in the control unit is deactivated.
d ^ ^ l
1. Solenoid valve
2. Valve
3. Valve spring
4. Piston
5. Pinion
6. Camshaft end section
7. Piston spring
8. Battery
9. Injection/ignition system relay
10. Phase transformer solenoid valve relay feed
11. Injection/ignition control unit
12. Ignition switch
34 Print no. 506.670