Table of Contents
Advertisement
These drivers are designed to work with Microsoft Word 5.0 and
5.5.
If you have already installed Word on your computer, go to Step
2 to install the new video driver.
Step 1: Install Word as normal.
Step 2: After you complete the Word installation, place the
display driver diskette into drive A. Make A the default drive by
typing A: <ENTER>. Run the SETUP program by typing
SETUP <ENTER>. Press any key to display a list of supported
applications. Use the arrow keys to select Word and press
<ENTER>. Use the arrow keys to select the desired screen
resolution and press <ENTER> (make sure your monitor is able
to display the resolution desired). Press <END> to begin the
driver installation process. A default drive and directory path will
be displayed. Use the backspace key to erase this and type in
your Word directory. After the files have been installed, press
any key to return to the list of supported applications. Press
<ESC> followed by Y to exit to DOS.
Step 3: Copy the driver file for the desired resolution that was
just installed to SCREEN.VID.
Chapter 4 SVGA Setup
43
Advertisement
Table of Contents
