Image Dislocation In Feeding Direction - Toshiba FC-22 Manual

(20) Image dislocation in feeding direction

Cause/Defect area
Scanner/printer adjustment
defect
Registration roller
Paper feed motor
Pre-registration guide
FC-22 TROUBLESHOOTING
Step Check items
1 Same dislocation on every copy?
2 Registration roller dirty, or spring out of
place?
3 Registration motor malfunctioning?
4 Paper feed motor malfunctioning?
5 Pre-registration guide mounted defec-
tively?
Adjust scanner/printer using adjustment mode.
Clean roller with alcohol.
Re-install spring.
Adjust or replace gears, etc. if they are not engaged
properly.
Check circuit or motor and replace them if neces-
sary.
Re-install guide.
4 - 76
Measures
January 2000 © TOSHIBA TEC