Paper Remaining On The Sorter Transport Path At Power On; Sorter Front Door Opened During Copying - Toshiba FC-22 Manual

EA3 Paper remaining on the sorter transport path at power ON
Is there any dirt or foreign matter around the non-sort paper sensor (PI4) or the sort paper
sensor (PI5)?
NO
YES
Remove any dirt or foreign matter.
Are both non-sort paper sensor (PI4) and sort paper sensor (PI5) working normally?
NO
YES
Replace any faulty sensor.
Replace the sorter controller PC board.
EA4 Sorter front door opened during copying
Is the stapler unit cover securely closed?
NO
Close the cover securely.
YES
Is the sorter securely mounted on the copier?
NO
Mount the sorter securely onto the copier.
YES
Is the feed guide securely closed?
NO
Close the feed guide securely.
YES
Are the stapler cover open/close switch (MS5), joint switch (MS1) and feed guide open/close
switch (MS10) all working normally?
NO
Replace any faulty switch.
YES
Replace the sorter controller PC board.
January 2000 © TOSHIBA TEC 4 - 13 FC-22 TROUBLESHOOTING