Toshiba FC-22 Manual page 51

Code Name
418 Abnormal detection counter K
(display/0 clearing)
Image quality control auto-start
452
time setting (ready)
453 Image quality control auto-start
print volume setting (continuous
printing)
Image quality control auto-start
455
print volume setting (accumu-
lated print volume)
480 Paper source priority
481 Automatic paper source change
Pre-running rotation of polygonal
485
motor
491 Out of specified paper size printing
505 Paper (plain paper, OHP, thick
paper).
Switched according to image
processing
507 Filter setting selection in Fiery
scanning
558 Start setting of developer
material counter image quality
control
559 Start count setting of developer
material counter image quality
control
FC-22 ADJUSTMENT
Allowable
Default
input value
0 0-16 Accumulated total of CE1, CE2, CE4
(Max.16)
* Enabled when 'Image quality control 3
(08-401)' is 1 (Enabled).
4 0-24 Setting time (hour) of Image quality con-
trol auto-start (ready)
300 0-999 Setting print volume (number of sheets) to
automatically start Image quality control
(continuous printing)
10 0-30 Setting print volume (x 100 sheets) to au-
tomatically start Image quality control (ac-
cumulated print volume)
0 0-5 0: A4/LT 1: LCF 2: 1st cassette
3: 2nd cassette 4: 3rd cassette
5: 4th cassette
1 0-1 0: OFF 1:Normal
When 1 is set, a paper source becomes
empty and the same size paper is present
in another source, the machine will auto-
matically switch to that source of paper.
0 0-1 Setting of pre-running rotation of polygo-
nal motor
0: Low speed rotation (Pre-running rotation)
1: Stop
0 0-1 0: Disabled
1: Enabled
1 0: Compatible paper not present;
1: Compatible paper present
0 0-1 0: non-filter mode (OFF)
1: filter mode (ON)
1 0-1 0: Disabled
1: Image quality control is started on
each setting counter (08-559).
100 0-999 Image quality control start count is set
when (08-558) is used
1 - 36
Contents
January 2000 © TOSHIBA TEC
Operation
procedure
group
1
1
1
1
1
1
1
1
1
1
1
1