Firmware Update Operation - Toshiba FC-22 Manual

5.1.3 Firmware update operation

1. Turn ON the power of copier on pressing 3 and 9 keys.
2. The following messages are displayed on copier control panel.
3. Serial connection is made by dial-up from PC.
Refer to "5.2 Installation Instructions for Firmware Update through PC" about procedures for dial-
up network connection.
Key in "#39" for "Phone number".
Default Location
FC-22 FIRMWARE UPDATING
Firmware Version Up Mode
> Make a connection from PC.
5 - 4 January 2000 © TOSHIBA TEC