Toshiba FC-22 Manual page 20

Digital key Icon
A —
B —
C —
D —
5
E —
F —
G —
H —
A —
B —
C —
D —
6
E —
F —
G Front cover, paper-exit unit open/close check
H Polygonal motor rotation status (Motor is rotating by 03 Output mode) 0: Normal rotation
7 — —
8 — Upper fuser roller thermistor (center) check
9 — Upper fuser roller thermistor (rear) check
0 — Lower fuser roller thermistor (center) check
[FULL COLOR]key: OFF, [AUTO COLOR]key: ON, [ENERGY SAVER]key: OFF
Digital key Icon
1 — Lower fuser roller thermistor (rear) check
2 — Temperature sensor check
3 — Humidity sensor check
4 — Drum thermistor Y check
5 — Drum thermistor M check
6 — Drum thermistor C check
7 — Drum thermistor K check
8 — —
9 — —
0 — —
FC-22 ADJUSTMENT
Item
Item
1 - 12
Condition
1: Cover/unit open
Thermistor output value is displayed with 8 bit.
Thermistor output value is displayed with 8 bit.
Thermistor output value is displayed with 8 bit.
Condition
Thermistor output value is displayed with 8 bit.
Sensor output value is displayed with 8 bit.
Sensor output value is displayed with 8 bit.
Thermistor output value is displayed with 8 bit.
Thermistor output value is displayed with 8 bit.
Thermistor output value is displayed with 8 bit.
Thermistor output value is displayed with 8 bit.
January 2000 © TOSHIBA TEC