Setting The Proportional Band Of The Pid-Controller - Lauda Ecoline RE 204 Operating Instructions Manual

Starting up
6.4.5.1

Setting the proportional band of the PID-controller

34
and 4x
and 3x
or
or
− Directly from level 0 (setpoint selection), press the key
combination on the left (top one on RE 3xx, bottom one
RE 2xx), until the PARA function is reached, then
− switch to level 2 from PARA (see above) with key on the
left.
− Within this level it is possible to scroll with the keys.
− The display shows the current bath temperature Xp
and the current setting. To alter the setting press the
key on the left. Available settings from 0,5 to 9,9 °C .
( Section 6.4.5.2.
( Section 9. Technical data))
− Display flashes (approx. ca. 4 s).
− During this time start to set the required value with one
of the two keys
− Forward with the key to "Setting the reset time" or
− with the key back to "PARA".
Note).