Table of Contents
Advertisement
Starting up
6.4.2
Pump output
22
− The refrigeration system can normally work with automatic operation = A.
The refrigeration system switches on or off depending on the temperature and
operation status.
− In special cases the cooling machine can be switched off ! "0" or adjusted at
permanent running ! "I".
and 1x
or
− For setting the pump output from level 0 press the key
combination shown on the left, or
− move forward from COOL function with this key
− The display shows the current bath temperature, PUMP and
the current output step. To alter the setting press the key
shown on the left.
− Display flashes (approx. 4 s).
− During this time start to set the required step with one of the
keys.
0 = pump stopped, heating off
1 = low pump output
2 , 3 , 4 = medium pump output
5 = maximum pump output
− The pump responds immediately (can be heard). (Setting is
entered after approx. 4 s
− Move forward with key to "Selecting the setpoint resolution"
or
− back with the key to "COOL - function" (RE 3xx) or to
"Setpoint selection" (RE 2xx).
Section 6.4.)
Hide quick links:
Advertisement
Table of Contents
