Table of Contents
Advertisement
Releasing a blocked burner
o The individual burners can be shut down and in this instance the
corresponding display will show the letter "b" (blocked).
o Burners will be shut down if the hob attempts to ignite the
burner three times without success. In this circumstance you
should switch the appliance off at the mains and check that the
sparking plug and the ignition sensor are clean. Otherwise
contact the Baumatic Customer Care Department.
o The burner can be released by pressing the relevant minus
button and the safety lock button (2) simultaneously for at least
two seconds.
o When released, the burner will be restored to level 0 and is
ready to be reignited.
If the release procedure is repeated for five consecutive times
during a fifteen minute period, the display will show "FLT06"
and the release procedure cannot be repeated for an additional
fifteen minutes. If a burner keeps locking then please contact
the Baumatic Customer Care Department.
Safety lock
o This function makes it possible to lock the keypad
o Once activated, a decimal point will show on the power level
display of each burner.
o When the keypad is locked, the burner power levels and the
timer settings cannot be changed. The only action permitted is to
turn off the hob by pressing the ON / OFF button (1).
o If a burner is shut down it cannot be released if the safety lock is
activated. Therefore the keypad must be unlocked first before
performing the burner release procedure.
to protect it from accidental actions. It is activated
by pressing the safety lock button (2) for at least
two seconds.
15
Advertisement
Table of Contents
