Table of Contents
Advertisement
o To obtain a continuous variation of the power level simply hold
down the plus or minus button of the selected cooking zone and
release it once the display shows the desired level. You can
choose between 1 – 7 levels.
o By selecting level 0, you will switch the burner off.
Switching off a cooking zone
o To switch off a cooking zone press and hold the relevant plus
and minus buttons simultaneously for a moment.
o Alternatively, to switch off all the burners at the same time,
simply press the ON / OFF button (1) and the hob will return to
stand-by mode.
Setting the burner shutoff time
o The countdown will start immediately after the set time is
confirmed. If no burner is being timed the hob will switch off
automatically after 4 hours. Before setting a timer function,
please light any burners that you wish to link to the timer.
o To set a burner time, press the timer button (5). The timer
display (6) will show 0.00. The LED zone of the control panel
shows the position of each burner (11), the LED for burner 1 will
switch on and start to flash. This means that burner 1 is selected
and is ready to be programmed.
o Press the timer plus (4) or minus (3) button to select a different
burner to programme. Once identified by the corresponding LED,
press the timer button (5) again to confirm.
o Following this, the first number of the timer display (6), which
indicates the hours, will start to flash. Press the timer plus and
minus to increase or decrease the operating hours from a
minimum of 0 to a maximum of 9. The variation will be
continuous if the buttons are held down.
o With the timer function (5) a maximum time can
be set after which a burner will switch off.
o Each burner can be timed independently of the
others and can be set either when the cooking
zone is on or off.
13
Advertisement
Table of Contents
