Contents User Instructions and Installation information. Page. Important Safety Notes General Information 5 – 7 Appliance Description 8 – 10 Instructions For Use Helpful Hints Cleaning and Maintenance Trouble Shooting Guide 14 – 16 Installation Instructions Electrical Connection Technical Data Conditions of Guarantee RATING PLATE The appliance rating plate is located on the underside of the hob, once the appliance is...
Cooking pots and pans should be kept out of reach of children when in use to avoid injury. Servicing This appliance should only be repaired or serviced by a Baumatic Ltd Technician or one of there authorised service agents Environment Please dispose of all waste packing materials and old appliances at an authorised disposal site giving due regard for the environment.
Equipment (WEEE). This guideline is the frame of a europeanwide validity of return and recycling on Waste electrical and electronic Equipment As Baumatic have a policy of continued product improvement, the right is reserved to adjust and make any modifications deemed necessary without notification.
Implants must be designed to comply with relevant regulations. If in doubt, you should consult the manufacturer of your device or your Doctor. In this respect, Baumatic can only guarantee the conformity of our own product. Appliance Description The following models are covered by this installation and instruction for use manual:...
When unpacking the appliance please check that the following items are contained within the packaging: 1 Baumatic hob 1 Ceramic hob scraper 1 Installation / Instruction manual 1 Baumatic guarantee card 4 Fixing brackets 4 Fixing screws 4 Spring clips 1 Sealing strip Before using your hob for the first time.
Touch Controls. 1. Cooking Zone Selector Key 5. Power On / Off Key 2. Increase Power Key 6. Safety Lock Key 3. Decrease Power Key 7. Zone Booster Key 4. Timer Function Key...
Instructions for use These User Instructions should be retained for future reference and for use by any person who is perhaps unfamiliar with the appliance. USING THE HOB The INDUCTION HEATING system quickly transfers the energy required to cook directly to the pan and therefore the surface of the hob remains cool.
Residual Heat Indicator “H” After use an will light in the power level indicator of the zone that has been in use The residual heat indicator will remain illuminated until the temperature drops below 60° C, the residual heat indicator may not illuminate if during the cooking period the temperature did not reach 60°...
Page 10
Power Level Settings The table below is intended as a guide only, they will vary depending on the quality and type of cooking pan being used and the quantity of food being cooked. Zone Control Setting Chart APPLICATION POWER LEVEL EXAMPLES Keeping food warm.
Helpful Hints The ceramic surface of the appliance is non-porous and is not sensitive to quick changes in heat, this allows for hot pans to be moved onto cold heat zones without damaging the hob, always ensure that when pans are being moved from zone to zone that they are lifted and placed down gentle onto the surface and not by sliding them across the ceramic surface as this may damage the appliance and will not be covered under the guarantee.
Never use a cleaning agent before confirming it is suitable for ceramic hobs. NOTE: We have included a ceramic glass scraper to assist in the cleaning of your new Baumatic hob, The blade supplied in the scraper will, after several uses become worn, it is the responsibility of the customer to ensure that the blade is always of good quality so as to avoid any scratches to the ceramic surface.
Baumatic Engineer. Important: Should you call out a Baumatic engineer and the fault is listed in the table below or to repair a fault that is because of incorrect installation or use of the appliance then a charge will be made even though the appliance is within the warranty period.
Building Standards (Issued by the Scottish Development Department). IEE Wiring Regulation Electricity at Work Regulations Baumatic Ltd Installation Instructions Positioning The Appliance This appliance is classified as Class 3 and therefore is to be built into a kitchen unit (depending on size) or 600mm worktop, providing the following minimum distances are allowed 580mm between the top surface and the underside of any horizontal surface above it.
Page 15
Under side of hob Terminal Block Spring Plate location points, Slide spring clip into place making sure the hole in the plate lines up with the hole on the underside of the hob, fixing bracket screw will now locate in the hole to secure the hob unit to the underside of the work surface.
Page 16
HOB APERTURE DIMENSIONS MODEL Fig. 2 5 mm Air Inlet Outlet Fig. 3 6 mm Insulation Panel...
The appliance must NOT be connected to the mains supply by means of a 13A plug and socket. SERVICING During the guarantee period, all service intervention should be referred back to the Baumatic Ltd Service department. Please note that intervention or repair by any unauthorized personnel will invalidate such guarantee.
Technical Data ELECTRICAL DETAILS. Rated Voltage: 230V ac 50Hz Type Induction Supply Connection: Switched Double pole Isolator with 3mm minimum contact separation. Mains supply cable rating: 6mm2 PVC/PVC twin and earth (For UK Use) H05 RR-F <HR> Marked or above (For European Use. POWER INPUTS AND PROTECTIVE FUSE RATING.
The conditions of the guarantee, which applies, to your Baumatic appliance are as follows: All ‘Work’ in relation to the Guarantee must be carried out by Baumatic Ltd or an approved service agent of Baumatic Ltd. Any claims made under the terms of the guarantee must be supported by the original invoice / bill of sale issued at the time of purchase.
Need help?
Do you have a question about the B23 and is the answer not in the manual?
Questions and answers