Rev. F
2.
PAPER FEED ASSEMBLY
a) Apply a drop of lightweight oil on the paper feed clutch gear
and sliding shaft of the solenoid armature.
(Oil is intened
for clutch bearing lubrication).
(See Figure
2)
Figure 2. PAPER FEED ASSEMBLY
3.
RIBBON FEED ASSEMBLY
a) Inspect ratchets, pawls, and springs for wear and mesh (left
and right).
b) Clean and lubricate all gears and springs with grease and oil
as indicated.
(See Figure
3)
c) Verify that both ribbon spools rotate freely when both ribbon
releasers are in neutral position (neither spool engaged).
Figure
3.
RIBBON FEED ASSEMBLY
6-4