1.
CARRIAGE ASSEMBLY AND TIMING FENCE
a) Using a soft clean cloth, wipe both sides of timing fence.
If
necessary,-use a mild detergent.
(See Figure 1)
.
CAUTION: NEVER USE AN ORGANIC SOLVENT, AS THIS WILL DAMAGE
TIMING FENCE.
b) Wipe the carriage guide bars, all rollers and platen.
c) Lightly lubricate guide bars using lightweight oil (See Figure 1).
d) Remove print head from carriage.
e) Using an eye loupe, verify that print wires align flush with face
of print head jewel. (Make sure that print wires are not recessed
in the jewel). (See Figure 1)
f) Re-mount print head on carriage assembly.
Id-1f
?
/1
-
I
/11
$'/
II
~
I
I
I
,
.............. L'
Figure 1. CARRIAGE ASSEMBLY AND TIMING FENCE
6-3
Rev. F