6.2
SERIES 300 PREVENTIVE MAINTENANCE
The following Preventive Maintenance (PM) procedures apply to the
Series 300 printers.
FREQUENCY OF P.M.
TIME REQUIRED
CLEANING MATERIAL
6 MONTHS
1
HOUR (APPROXIMATELY)
TWO SOFT CLEAN CLOTHS
MEDIUM BRISTLE CLEANING BRUSH
RECOMMENDED TOOLS
Refer to Section 6.4 of the Maintenance Section.
LUBRICANTS RECOMMENDED:
Lightweight Oil (choice of three):
1) Teilus No. 27 (Shell), CDCC Spec No. 30050005.
2) Teressa No. 43 (Esso), CDCC Spec. No. 30050006.
3) Vaculine No. 1405 (Mobil), CDCC Spec. No. 30050007.
Grease
Rheo1ube - No. 723 ms, CDCC Spec. No. 30050004
Oil
Anderol No. 465, CDCC Spec No. 30050002
PREPARATION
1.
Obtain print sample prior to beginning of P.M.
2.
Clean printer with vacuum cleaner, if available.
Rev. F
6-2